Roof Ventilation
-
Manthorpe G502 Rafter Roll Tray 650mm x12m -
Manthorpe Single Pantile Tile Vent- 5,000 - 10,000mm² airflow per unit
- Inline and discreet ventilating tile
- Integral sidelock clip to ensure secure fit
- Adaptor available for mechanical extraction
- Available in four colours
- Suitable for roof pitches as low as 20º
-
Manthorpe G1105 Abutment Flash Vent 3mClick To View Full Product Details- 5,000mm² airflow
- Suits all tile profiles
- Works down to a 15° pitch (extra roll required for pitches below 20°)
- No specialist tools required for installation
- Integral flyscreen
- Two pieces can be fitted together to cover any length of lap between the lead and the tiles
- Independantly Wind tunnel tested for weather tightness over profiled, non-profiled tiles and slates.
-
6m Roll Out Rafter TrayClick To View Full Product Details- Accommodates 400mm to 600mm rafter centres
- 25,000mm2/m airflow
- Flexible to suit uneven refurbishment details
- Available in a double width version
-
Ubbink Vepac Slate Vent & Mesh UB11- Vepac vents are suitable for high or low level ventilation in roofs of 25° and over
- Each vent has a slotted inhibitor to keep out large insects and vermin
- Provides a free vent area of 10,750mm².
-
10mm Over Fascia Vent 1m lengthsClick To View Full Product Details- G1200N provides 10,000mm2 airflow per meter
- 1m in length
- Fit with all roof tiles and slates
- Discreet design
- Fixes easily into the top of the fascia board
-
Klober Profile-Line Flat Terracotta- In-line design makes it unobtrusive on the roof line
- Can be used at high or low levels and for soil ventilation or mechanical extraction when used with a Klober Flexipipe
- Built-in downpipe ensures ventilation path into roof space
- Adaptor and Flexipipe available for soil ventilation or mechanical extraction
- Complies fully with the relevant Building Regulations and British Standards
-
Klober Uni-Mini Slate Vent Slate Grey- For roof pitches of 22.5° and above
- Built in downpipe allows direct ventilation into the roof space
- In-line design
- Fully wind tunnel tested
Click To View Full Product Details -
Klober Universal Slate Vent 600 x 300mm- For roof pitches of 22.5° and above
- Built in downpipe allows direct ventilation into the roof space
- In-line design
- Fully wind tunnel tested
